Products

The FMC-IP-E3 High Speed Ethernet Interface provides connectivity from high speed 100 Base-T full duplex Ethernet to either DS3 or E3 networks.

Features
100 Base-T full duplex Ethernet in accordance with IEEE 802.3u via 1 RJ45 port
Throughput data rate of 42/32 Mbps (DS3/E3)
Succinct status and diagnostic features using LEDs and a built-in self-test algorithm
Alarm Relay
Supports VLAN transparency (no VLAN processing)
Supports MPLS (Multi Protocol Label Switching) transparency

The EA-120 FE1 CSU/DSU series supports HDB3 (High Density Bipolar 3) coding and provides continuous error checking, performance polling, and in-service diagnostics. The versatile EA-120 provides up to four sets of DTE equipment operating rates from 56 to 1984 Kbps and one Drop and Insert DTE operating at E1 (2048 Kbps) to be connected directly to the E1 network services. The series enables users to interconnect LANs and WANs, CAD and CAM, video conference, mainframe hosts, etc..

CC-1063 takes up to three low speed slots and one high speed slot for traffic signals. Low speed cards can be 21-E1 or 28-T1. High speed card can be STM1 or OC3. With any combination of cards, the CC-1063 has full DS0 cross-connect capability built inside.

It can be used as a 63 E1 DS0 cross-connect, using either input streams from the three 21-E1 plug-in cards, or the input stream from the single STM1 plug-in. Similarly, 28-T1 plug-in or OC3 plug-in can be used.

Olencom`s OM-16 series products, T1/E1/Combination optical multiplexer, are optical transmission equipments for up to 16 T1/E1/Combination signals transmitted through the fibre link. The T1/E1 signals are transmitted over optical fibre for better quality and longer transmission distance. Besides, OM-16 provides many value-added functions to meet customs? needs. It is a very flexible and efficient way to use the OM-16 in your optical transmission network for voice, data, and wireless applications.

The MC-100-C universal media converters series provides transparent conversion of optical signals for ATM/SDH/SONET/Ethernet and other protocols at frequency up to 2.5 GHz and data rate up to 2500 Kbps. Different interfaces enable the MC-100-C to convert between any two optical media.

Two versions are available: standalone unit and plug-in card in Olencom’s FM-S rack, in cases where a high density solution is needed.

Olencom’s MC-100 series of media converters provides a Fast Ethernet 100Base-TX transmission through optical fiber. Different optical interfaces allow to use the MC-100 on Single-mode or Multi-mode fibers and on distances up to 120 km. 100Base-TX auto-negotiated / manual mode Fast Ethernet interface fully complies with IEEE 802.3u specification and provides 10/100 Mbps transmission in half/full-duplex mode.

Optical modem FM-V35 provides transmission of data stream through different types of optical fibers for distance up to 80 km.

V.35 interface allows N x 64 Kbps connection for customer’s equipment. FM-V35 provides different types of optical interfaces for single mode and multi mode fibers. FM-V35 is comes in two models: stand-alone device with AC or DC power supply or plug-in card (RM-E1) for the 19" or 23" rack-mounted chassis with power protection.

FM-S2U a 14-slot managed chassis provides a very flexible, low cost, compact solution for Ethernet transport over all types of optical fibers. It can be mounted into 19" rack at central office for aggregation of Ethernet streams from branch/customer’s offices through fiber optic cables of different length. FM-S2U supports all Olencom MC Series media converter modules including our new line of WDM enhanced media converters that allow full duplex transmission over a single fiber.

Optical modem FM-E1 provides transmission of E1 stream through different types of optical fibers for distance up to 80 km.

E1 interface, complying with G.703 requirements, allows 2048 Kbps connection for customer’s equipment.

FM-E1 provides different types of optical interfaces for single mode and multi mode fibers.
FM-E1 is comes in two models: stand-alone device with AC or DC power supply or plug-in card (RM-E1) for the 19" or 23" rack-mounted chassis with power protection.

FM-4 is an optical multiplexer based on WDM (Wavelength Division Multiplexing) technology. It provides transmission of four E1 and one Fast Ethernet streams through single pair of optical fibers.
FM-4 takes up to four E1 2.048 Mbps interfaces and one plug-in card for Fast Ethernet 100 Mbps interface.
On optical transmission line, the FM-4 8MB provides different types of optical interfaces for different distances — up to 20/40/60/80 km.

The FMC-IP-4E1 — IP Inverse Mux — provides connectivity from 10/100 BaseT LAN to E1 WAN through multiple E1, up to 4 E1 links. FMC-IP-4E1 also provides a bridging function from Ethernet to E1 links. This unit can provide customers from 2Mbps to 8Mbps network bandwidth.